Aerospace Defense

Numerical modeling of electromagnetic loss mechanisms in Multi Layer Graphene/Epoxy and CNT/Epoxy absorbers based on grooved‑surface perturbations and multiple scattering within the porous core

Document Type : Original Article

Authors

Mohammad Khakbaz 1
Reza Sarkhosh 2
Masoud Javadi 2
Abbas Zarghami 1

1 Ph.D Student, Department of Aerospace Engineering, Faculty of Graduate Studies, Shahid Sattari University of Aeronautical Sciences and Technology, Tehran, iran

2 Assistant Professor, Department of Aerospace Engineering, Shahid Sattari University of Aeronautical Sciences and Technology, Tehran, Iran

Abstract
Electromagnetic absorbers operating within the X band play a critical role in reducing wave reflection, improving impedance matching, and enhancing the performance of radar systems In this study, a three-layer structure consisting of a surface Graphene/Epoxy layer, a porous CNT/Epoxy core, and an aluminum backing plate with a total thickness of 7 mm was designed and evaluated using a dual approach framework: numerical simulation in COMSOL Multiphysics and analytical modeling based on classical electromagnetic theories.

The numerical results indicate that the reflection loss reaches approximately −18.8 dB (corresponding to 98% absorption) around 9 GHz, whereas the analytical model predicts a peak value of −21 dB at the same frequency. Both methods show closely matched trends within the 8–12 GHz band, with deviations becoming more pronounced at the band edges and remaining below 10% near the resonance region. Impedance analysis reveals that minimizing the mismatch between the real part of the effective impedance and the free space value is the primary factor responsible for the reduced reflection at resonance. Furthermore, the geometric sensitivity analysis shows that increasing the thickness of the surface layer shifts the absorption peak toward approximately 8.5 GHz, while increasing the core thickness moves it toward around 9.5 GHz. These findings demonstrate that precise control over the geometry, thickness, and material parameters of each layer enables effective tuning of the frequency response and optimization of the absorber’s performance.

Keywords

Electromagnetic absorption
X‑band
Porous CNT/Epoxy core
Grooved Graphene/Epoxy surface
Impedance matching

Subjects

 [1] Lu, Z., Liu, L., Chen, Z., Wang, C., Zhu, X., Lu, X., Yuan, H., & Huang, H. (2025). Progress in electromagnetic wave absorption of multifunctional structured metamaterials. Polymers, 17(18), 2559. https://doi.org/10.3390/polym17182559
[2] Zecchi, S., Cristoforo, G., Bartoli, M., Tagliaferro, A., Torsello, D., Rosso, C., Boccaccio, M., & Acerra, F. (2024). A comprehensive review of electromagnetic interference shielding composite materials. Micromachines, 15(2), 187. https://doi.org/10.3390/mi15020187
[3] Parveen, A., Irshad, A., U.-e.-Kalsoom, & Shah, M. N. U. (2025). Advancing electromagnetic wave absorption in metamaterials: Progress, challenges, theoretical background, and advanced technological applications. Advanced Materials Technologies, 10(20). https://doi.org/10.1002/admt.202500710
[4] Du, Y., Liu, Y., Wang, A., & Kong, J. (2023). Research progress and future perspectives on electromagnetic wave absorption of fibrous materials. iScience, 26(10), 107873. https://doi.org/10.1016/j.isci.2023.107873
[5] Sun, Q., Li, S., Jin, L., Xiao, J., Wulin, T., Hou, X., & Zhang, X. (2025). Lightweight and high-performance electromagnetic wave absorbers based on hollow glass microspheres and carbon-supported Ni–Co composites. Coatings, 15(7), 775. https://doi.org/10.3390/coatings15070775
[6] Wu, C., Liu, Y., & Zhao, G. (2024). Carbon nanospheres for electromagnetic wave absorption and shielding. ACS Applied Nano Materials, 7(8), 8926–8938. https://doi.org/10.1021/acsanm.4c00438
[7] Chen, C., Pu, N., Liu, Y., Huang, S., Wu, C., Ger, M., Gong, Y., & Chou, Y. (2017). Remarkable microwave absorption performance of graphene at a very low loading ratio. Composites Part B: Engineering, 114, 395–403. https://doi.org/10.1016/j.compositesb.2017.02.016
[8] Munir, A. (2017). Microwave radar absorbing properties of multiwalled carbon nanotube polymer composites: A review. Advances in Polymer Technology, 36(3), 362–370. https://doi.org/10.1002/adv.21617
[9] Zhao, H., Cheng, Y., Liu, W., et al. (2019). Biomass-derived porous carbon-based nanostructures for microwave absorption. Nano-Micro Letters, 11, 24. https://doi.org/10.1007/s40820-019-0255-3
[10] Zhou, Z., Yan, Y., Liu, J., He, Z., & Wang, Y. (2025). Porous biomass carbon composites derived from Canadian goldenrod and their excellent microwave absorption. Applied Sciences, 15(17). https://doi.org/10.3390/app15179474
[11] Du, J., Li, T., Li, J., et al. (2025). Design of flexible MXene/graphene-based fiber fabrics for broadband electromagnetic wave absorption. Advanced Fiber Materials, 7, 811–826. https://doi.org/10.1007/s42765-025-00523-y
[12] Zhang, C., Yang, W., Jiang, B., et al. (2025). Structure-driven design of cellular graphene/polystyrene composites with balanced dielectric loss and impedance matching for multiband electromagnetic wave absorption. Chemical Engineering Journal, 517, 164290. https://doi.org/10.1016/j.cej.2025.164290
[13] Khakbaz, M., Motavasselolhagh, M., Javadi, M., & Sarkhosh, R. (2026). Experimental evaluation of combining a two-phase nanocomposite containing Al₂O₃ and NbC in a surface-coated resin matrix: A study based on dielectric losses and radar reflectance. Mechanics of Advanced Composite Structures. https://doi.org/10.22075/macs.2026.38962.1918
[14] Zhao, Q., Li, F., & Liu, J. (2024). Analytical modeling of wave absorption performance in gradient graphene/polymer nanocomposites. Materials, 17(12). https://doi.org/10.3390/ma17122946
[15] Khakbaz, M., Javadi, M., & Sarkhosh, R. (2025). Investigation of radar cross-section reduction of quadratic and conic aluminum surfaces in the X-band frequency range. Mechanics of Structures and Fluids, 15(2), 65–80. https://doi.org/10.22044/jsfm.2025.15682.3937 (In Persian)
[16] Qobadi, N., Hoseini Moradi, S. A., & Farkhzadi, M. (2022). Synthesis and characterization of nickel–graphene ferrites as electromagnetic wave phase shifters in radar systems. Aerospace Defense Journal, 1(3), 66–82. https://doi.org/20.1001.1.28211553.1401.1.3.5.6 (In Persian)
[17] Caloz, C., & Itoh, T. (2005). Electromagnetic metamaterials: Transmission line theory and microwave applications. Wiley.
[18] Sarkhosh, R., Kazemi Nasrabadi, M., & ParsaFar, R. (2024). Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/fumed silica composites. Iranian Journal of Manufacturing Engineering, 11(2), 37–57. (In Persian)
[19] Liu, Y., Tai, R., Drew, M. G. B., & Liu, Y. (2017). Several theoretical perspectives of ferrite-based materials—Part 1: Transmission line theory and microwave absorption. Journal of Superconductivity and Novel Magnetism, 30, 2489–2504. https://doi.org/10.1007/s10948-017-4043-3
[20] Calderín, L., Karasiev, V., & Trickey, S. B. (2017). Kubo–Greenwood electrical conductivity formulation and implementation for projector augmented wave datasets. Computer Physics Communications, 221, 118–142. https://doi.org/10.1016/j.cpc.2017.08.008
[21] Ivliev, S. V. (2017). The Kubo–Greenwood formula as a result of the random phase approximation for the electrons of metals. Journal of Physics: Conference Series, 941, 012047. https://doi.org/10.1088/1742-6596/941/1/012047
Aerospace Defense
Volume 4, Issue 3
Winter 2026
Pages 66-88

  • Receive Date 14 April 2026
  • Revise Date 29 April 2026
  • Accept Date 11 May 2026

Home

Submit Manuscript

Reviewers

Contact Us